Sytech Supplies Consumables

Router Bits

Colur Sign Vinyl Liquid Removal Products Digital Print Media Solvent Ink Dye Sublimation Ink Heat Transfer Flexx Application Tape Sign Board Spacers Router Bits Cutting Blades Magnetic Sheeting PVC Signex Board

Victor12 Shaft: 12.7mm Angle: N/A Bit Diameter: 25.875mm	Victorbevel Shaft: 12.7mm Angle: N/A Bit Diameter: 25
Victbevel Shaft: 6mm Angle: N/A Bit Diameter: 25mm	Vicbevel2 Shaft: 12.7mm Angle: N/A Bit Diameter: 32mm
Victodbbevel Shaft: 6mm Angle: N/A Bit Diameter: 20mm	Victlrgflat Shaft: 12.7mm Angle: N/A Bit Diameter: 33.5mm
Vic31.75 Shaft: 12.7mm Angle: N/A Bit Diameter: 120mm	Vicpoint90 Shaft: 6mm Angle: 90 Bit Diameter: 32mm
Vicpoint Shaft: 6mm Angle: 120 Bit Diameter: 32mm	Victor12.7 Shaft: 12.7mm Angle: Flat Bit Diameter: 25.4mm
Victoflat6 Shaft: 6mm Angle: Flat Bit Diameter: 25.4mm	Victorflatdrill Shaft: 12.7mm Angle: N/A Bit Diameter: 12.7mm
Vicdeepdrill Shaft: 6mm Angle: N/A Bit Diameter: 6mm	Victordrill6 Shaft: 6mm Angle: N/A Bit Diameter: 6mm
Victengrave Shaft: 6mm Angle: 30 Bit Diameter: 0.2mm	Victor12 Shaft: 6mm Angle: 60 Bit Diameter: 0.1mm

End Mills Discover the strength of innovation in our range of top-quality, high speed solid carbide end mills. The end mills combine a short cutting time with greater precision and more accurate dimensions. The end mills are all produced on ultramodern 9 axes, 2 spindle tool grinding machines providing cutting tools that meet your most critical requirements. To meet the demands for increased productivity and cater for use of high speed machines, our range is available in TiALN coating enhancing surface finish and tool life (others available on request). Micrograin solid carbide and ball nose end mills are available in a range of sizes from 3mm to 25mm. Our range of solid carbide rougher end mills are the benchmark in roughing applications. The high-tech features improve roughing applications on all materials and are most effective in applications requiring high stock removal rates. End Mill Two Flute Micrograin Solid Carbide 30° right hand spiral Right hand cutting-centre cutting Standard and long series End Mill Four Flute Micrograin Solid Carbide 30° right hand spiral Right hand cutting-centre cutting Standard and long series End Mill Two Flute B/Nose Micrograin Solid Carbide 30° right hand spiral Right hand cutting-centre cutting Standard and long series End Mill Three Flute Micrograin Solid Carbide 30° right hand spiral Right hand cutting-centre cutting Standard and long series

Jobber Drills Micrograin Solid Carbide 2 Flutes Designed for deep hole drilling Advanced material and geometry 140 Degree point angle 30 Degree helix angle to promote rapid chip evacuation Tap drill sizes 45 Degree facet point

Aluminium End Mills Micrograin 37 or 45 degree right hand spiral Right hand cutting-centre cutting Standard and long series

High Performance Drills           Micrograin Solid Carbide Designed for hardened steel, stainless steel, tools. steel, titanium, nickel base, alloys and other Solid Carbide and coolant through styles Metric diameter range 5 to 20 mm TiN and TiALN coating available Stub screw machine and 5 X diameter drilling lengths available 2 Straight Flutes Advanced material and geometry More rapid design for improved drill accuracy 140 degree point angle Tap drill sizes

Stub Drills Micrograin Solid Carbide Short Length 45° four facet point 2 Flutes More rigid design for improved drill accuracy. Advanced material and geometry 140° point angle 30° helix angle to promote rapid chip evacuation Tap drill sizes

Reamers

High Helix           Micrograin Solid Carbide 3, 4 and 6 Flute centre cutting Standard length Right hand Helix Helix angle 45 - 50° Right hand Cutting Universal application Suitable for high tensile materials and non-ferrous metals TiALN coating Coarse pitch Deeper slotting for course pitch or heavy side cuts (general applications) For finish milling applications with the highest surface quality requirements Designed for tougher milling applications in materials Rc 55-70

Form Tools

Ripper Cutters Micrograin Solid Carbide 3 and 4 Flute centre cutting Standard length TiALN coating Coarse pitch Deeper slotting for course pitch or heavy side cuts (general applications)

Single Flute Cutters