signAbracket

Versatile • Reusable • Simply Brilliant

Features


1. signAbracket can hold all thicknesses of flute board between 3mm and 6mm.

2. The ‘living hinge’ allows the fixing plate to bend and adapt to various support surfaces.

3. signAbracket has specially designed holes for various fixing systems.

4. Environmentally friendly product.

Versatile Fixing


1. Secure to poles using cable ties

2. Secure to 90 degree corners using screws or nails.

3. Can be secured to large poles or irregular shapes using steel or plastic strapping.

4. Secure between dual poles using cable ties (see below for more examples). Very strong installation.

Versatile Display


1. Once installed…

2. Signs can be easily changed over.

3. Signs can be installed to hang from ceiling.

4. Install to square post with cable ties.

Installation Methods

Fitting signAbracket


1. Insert the prongs of the signAbracket into the flutes of the flute board.

2. Secure to your sign by inserting the two sign securing screws.

Flat Wall Install


1. Secure signAbracket to a flat surface using screws or nails.

2. Then fit and secure your sign to signAbracket.

Corner Install


1. Holding the signAbracket onto corner, secure the signAbracket in place.

2. Then fit and secure your sign to signAbracket.

Small Pole Install


1. Fit and secure signAbracket to your sign, then insert cable ties through signAbracket.

2. Fit signAbracket to pole and tighten the cable ties with pliers.

Large Pole Install


1. Fit and secure the signAbracket to your sign, then insert steel strapping through signAbracket.

2. Fit signAbracket to pole. Tighten and secure steel strapping in place.

Dual Pole Install


1. Measure distance between poles and produce sign at 5mm less than distance measured.

2. Fit and secure signAbrackets to your sign. Insert cable ties through signAbrackets. Install sign and tighten cable ties.